Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Commercial Locksmith Across Sunset
Commercial locksmith work in Sunset, FL runs $65 – $180 for most lockout and rekey calls, $120 – $350 for commercial door lock replacement, and $350 – $900 for panic bar installation, with the full price written down before any work starts. We serve every commercial block in Sunset from SW 72nd Street down to SW 104th Street, and our techs usually arrive within 30 – 45 minutes for emergency calls. If you’re locked out of a storefront on Sunset Drive or need a master key system set up at a warehouse near the Turnpike, call (956) 275-7388 and a live person answers, day or night.
Sunset is a strange mix of aging commercial strips and newer retail build-outs, and we know the difference because we work both every week. A 1970s storefront on a side street off Sunset Drive doesn’t take hardware the same way a 2015 build-out near the Palmetto does. That matters when you’re quoted a price over the phone by someone who has never seen the door.
Why Ridley Locksmith & Security Is Sunset’s Preferred Commercial Locksmith Company
We’re not a call center that dispatches whoever is closest and bills whatever the tech feels like. Ridley Locksmith & Security is an independently owned and operated part of the Garrison Partners family, and every technician wears a uniform, carries identification, and works to The Garrison Standard. That standard has been in place since 2007, and it means one thing on a commercial call: the person at your door is the person you called about.
Local business owners in Sunset tell us the same two things. They’ve been burned by a price that doubled when the tech showed up, and they’ve had a lock drilled because it was faster than opening it properly. We don’t do either. Every job gets a written price before work begins, and no tech is allowed to touch a lock until you’ve seen that number and said yes. That’s not a policy we mention in passing. It’s the single most important rule in how Commercial Locksmith calls run.
Drew Kowalski leads our team, and he holds every tech to one standard: if the fix doesn’t hold, we come back. That’s the 365-Day Done Right Promise, and it’s written on every invoice and every job ticket, not just mentioned on a website.
Replace Commercial Door Lock in Sunset
Replacing a commercial door lock in Sunset typically costs $120 – $350, depending on whether we’re swapping a standard cylindrical lock on a rear office door or replacing a mortise lock body on a storefront entry that’s been in place since the Carter administration. The job usually takes 45 minutes to two hours once the hardware is on the truck, and we carry Schlage, Kwikset, and Yale commercial lines locally so we’re not ordering parts and making you wait a second day.
Matching Old Doors to New Hardware
The most common reason a commercial lock replacement in Sunset takes longer than expected is the door itself. A storefront hung in 1985 may have settled, and the strike plate no longer lines up with a brand-new lock body. We don’t just screw in the new hardware and leave. We check the alignment, adjust the strike, and make sure the door latches with the same pressure it did when it was hung.
When Replacement Beats Repair
If a lock cylinder is worn to the point where a key jiggles in and out or a deadbolt won’t throw cleanly, repair is throwing good money after bad. Replacing the lock body gets you fresh pins, a new keyway, and hardware that meets current commercial code. We also rekey the new lock as part of the job so no old keys work.
Panic Bar Installation in Sunset
Panic bar installation in Sunset runs $350 – $900 for most single-door commercial exits, and the full written price depends on the door’s condition, the bar’s finish, and whether it’s a rim-mounted or vertical rod device. Most installations take two to four hours, and we schedule them around your operating hours so you don’t close down for a full day.
Code Compliance on Sunset Storefronts
Fire code in South Florida requires panic hardware on doors serving more than 50 people or on any exit marked as an emergency route. A strip center on SW 88th Street with a lunch crowd at capacity needs a bar that throws with one hand and resets itself. We install rim bars, mortise bars, and vertical rod devices, and every one is tested before we leave.
Replacing a Worn Bar Without Replacing the Door
Older panic bars get loose. The dogging mechanism sticks, the latch doesn’t retract fully, and eventually the bar becomes a liability instead of an exit device. In a lot of Sunset buildings, the door itself is fine. You don’t need a new door. You need a new bar installed on the existing prep, and that’s a job we do regularly without telling you to spend three times as much on a full door replacement.
Trusted Brands We Service in Sunset
We work on Schlage commercial locks, Kwikset hardware, Yale cylindrical locks, and high-security lines including Medeco, Mul-T-Lock, Abloy, and Sargent. For Sunset customers, that means we don’t tell you to “just replace it with whatever fits.” We stock parts for the most common commercial hardware in the area, and when we install high-security hardware like Medeco, we set up the key control program so you know exactly who has keys and who can duplicate them. That matters on a commercial door in Sunset where a former employee’s key is as good as a current one until the lock is rekeyed.
Common Commercial Locksmith Problems We See in Sunset Homes
- Mismatched hardware on old doors: Sunset, FL sits in a corridor where commercial storefronts and light-industrial suites mix with older residential blocks, so a single commercial call here often means matching modern ANSI Grade 1 hardware to doors that were hung decades earlier. Hinges, strikes, and door closers that no longer align with off-the-shelf replacement locks are the norm, not the exception.
- Key snapped in a mortise lock: Humid salt air doesn’t help aging lock internals. We were dispatched to a Sunset storefront after the manager’s key snapped off inside a Sargent mortise lock and the door wouldn’t secure at closing time. Our tech pulled the broken key fragment by hand and used non-destructive entry to free the cylinder, then rekeyed it and replaced the worn lock cylinder with a Medeco unit that matched the shop’s existing key control schedule. The door was locking correctly and the staff had new keys before their evening rush.
- Teaser pricing over the phone: Commercial doors in Sunset vary so much in age and hardware that a price named sight-unseen almost always changes once the tech is on site. We don’t play that game. You get a range on the phone, then a written fixed price after we see the door, before any work starts.
- Drilled locks that should have been opened: Drilling a lock that could have been opened non-destructively is the fastest way for a lazy tech to bill you for a full replacement. We open most commercial locks without damage, and when a lock does need to be drilled, you’ll know why before the drill comes out, and the replacement cost is already on the written price.
Pricing for Commercial Locksmith in Sunset, FL
Here’s what Sunset business owners can expect to pay, in real numbers, before they pick up the phone:
- Commercial lockout: $65 – $180, depending on time of day and lock type.
- Rekey a commercial lock: $25 – $45 per cylinder, plus a service call of $45 – $75.
- Replace a commercial door lock: $120 – $350, including the hardware and labor.
- Panic bar installation: $350 – $900 for a single door, depending on bar type and door prep.
- Master key system setup: $150 – $500 for small commercial systems, higher for multi-building setups.
Every one of those numbers is a written price, not a verbal estimate. We quote the full amount before any work begins, and it’s the number on your invoice. No call-out surcharge added at the door. No “oh, this is a different kind of lock” markup. Call (956) 275-7388 for a free estimate and we’ll tell you honestly what the job should cost.
We Also Serve Cities Near Sunset
Our commercial locksmith teams work throughout South Florida, including Miami, Hialeah, Miami Gardens, and Homestead. If your business sits just outside Sunset, we can still get to you quickly and with the same written-price guarantee. Call (956) 275-7388 and tell us where you are. A live person answers, and we’ll tell you exactly when a tech can be there.
Serving Sunset, FL - Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Commercial Locksmith in Sunset
We give you a firm price range over the phone, but we will not quote a fixed dollar amount until our technician sees the door. Anyone who gives you a fixed price before seeing the door is guessing, and in Sunset, where commercial doors range from 40-year-old mortise locks to brand-new cylindrical hardware, that guess almost always changes at the door. Call (956) 275-7388, describe the door honestly, and we’ll give you a range that holds.
Our tech arrives, inspects the door and existing hardware, and writes down a fixed price. You approve it. Then we remove the old lock, install the new one, adjust the strike plate so the door latches correctly, and test it with the new keys. The whole job on a standard commercial door in Sunset takes 45 minutes to two hours, and the written guarantee covers the work for one full year.
Every Ridley Locksmith & Security technician arrives in a marked vehicle, wearing a uniform with the company name, and carrying an ID badge with their name and photo. You can ask to see the badge before they touch a lock. We also tell you the tech’s name and vehicle description when you book the call, so you know who to expect at your door in Sunset. No subcontractors, no unmarked vans, no mystery crews.
Most panic bar installations in Sunset take two to four hours, start to finish. That includes removing the old bar if there is one, prepping the door for the new device, mounting the bar, and testing it under load. If the door itself needs repair before the bar can mount, we’ll tell you and put the extra work on the same written price before we start.
Drilling is sometimes necessary when a lock is so damaged that non-destructive entry isn’t possible, but it should never be the default. A tech who reaches for the drill first is usually trying to bill you for a full replacement that you didn’t need. On most Sunset commercial doors, we can open the lock without damage and then rekey or replace the cylinder for far less than a new assembly. If your lock does need to be drilled, we’ll show you why and get your approval before we do it. Call (956) 275-7388 and ask us directly about your lock.
Written by Drew Kowalski, Owner at Ridley Locksmith & Security, serving Sunset since 2007.







Before
After