Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Before
AfterFast, Reliable Residential Locksmith Across Banning
Most Banning lock jobs, a rekey, a deadbolt install, a lockout on Sundance or a house off W Ramsey, are finished the same day we get the call. We run a local crew from the Inland Empire office, and a live person answers the phone at (956) 275-7388 every hour of every day, not a voicemail tree. You get a written price before any work starts, and the person at your door is a background-checked, uniformed Ridley technician, not a subcontracted unknown. That matters in Banning, where homes run from mid-century tract builds near the I-10 to older stock up toward the Banning Bench, and no two lock jobs are quite the same.
Why Ridley Locksmith & Security Is Banning’s Preferred Residential Locksmith Company
Ridley Locksmith & Security has operated under The Garrison Standard since 2007. That is a written code every technician works to: show up on time, give a written price before touching a lock, and stand behind the repair for one full year. It is the reason Banning homeowners call us back and refer us down the street. Our Residential Locksmith team is trained on Kwikset, Schlage, and Yale hardware every day, and on high-security cylinders from Medeco and Mul-T-Lock when the job calls for it. We do not improvise on your front door.
What sets us apart from an independent shop with no structure, or a call center dispatching whoever is closest, is the 365-Day Done Right Promise. If a repair fails inside a year, Ridley returns and makes it right at no charge. That is a written guarantee, not a verbal assurance. And the price we quote over the phone is the price on the invoice. No add-ons at the door, no bait number that grows once a tech is standing in your driveway in Banning.
Deadbolt Installation in Banning
Deadbolt installation in Banning usually means one of two things: replacing a worn builder-grade Kwikset or Schlage deadbolt on a tract home near the I-10, or adding a deadbolt to an older door up by the Banning Bench that never had one. A standard single-cylinder deadbolt install in Banning runs $110 to $190, parts included. If the door needs a strike plate upgraded to longer screws, or the bore needs re-drilling for a larger bolt, that adds $30 to $60 to the written price.
ANSI Grade 1 Hardware
We stock ANSI Grade 1 deadbolts, the same standard used on commercial doors. On a Banning house, a Grade 1 Schlage deadbolt with a reinforced strike plate is the single biggest upgrade you can make to a front door for under two hundred bucks. We quote the exact model before dispatch, not “a deadbolt.”
When a Deadbolt Is Beyond Repair
A deadbolt that drags, sticks, or only throws halfway is a sign the internal tailpiece or the bolt itself is failing. Rekeying will not fix that. In those cases a replacement is cheaper than repeated service calls, and we tell you that plainly before any work begins.
Locksmith Key Replacement in Banning
Locksmith key replacement in Banning covers everything from cutting a spare for a Schlage deadbolt to full key replacement after a rekey. A standard key copy runs $5 to $12 per key at our van. If the original key is broken off in the cylinder, or you need a high-security Medeco or Mul-T-Lock key cut to code, expect $25 to $60 per key plus any cylinder work.
Keys Cut to Code vs. Copied
A copied key just traces the worn one you have. A key cut to code comes from the factory depth and spacing for your cylinder, so it runs smooth even when the old key is worn down. On older Banning homes with original locks, code-cut keys are often the difference between a stiff lock and one that turns clean.
Lost All Your Keys
If every key to the house is gone, we do not drill the lock first. We pick or shim a standard pin-and-tumbler cylinder non-destructively, then rekey the lock so the lost keys are dead. That is faster, cheaper, and leaves your hardware intact.
Trusted Brands We Service in Banning
We work on the hardware Banning homes actually have: Kwikset and Schlage on most mid-century builds, Yale on some older entry sets, and Medeco on the few homes that upgraded to high-security cylinders. We carry pins, tailpieces, and common cylinder parts for these brands in the van, which means a standard rekey or deadbolt swap on a Banning tract home does not wait on a parts run. For discontinued mortise lock bodies found on some downtown and Banning Bench properties, we source from specialty suppliers and give you a written lead time before quoting the job.
Common Residential Locksmith Problems We See in Banning Homes
- Builder-grade deadbolts from the 1960s through 1980s: Homes along the I-10 corridor often still carry the original Kwikset or Schlage pin-and-tumbler cylinders. The keys are worn, the pins are dull, and a rekey brings them back to life without replacing hardware.
- Discontinued mortise lock bodies near downtown and the Banning Bench: These are not sold at big-box stores. We either rebuild the cylinder or source a matched replacement, and we tell you the parts lead time before you approve anything.
- Heat and dust taking a toll on exposed locks: Banning’s dry summers and fine dust mean gate locks and side-door deadbolts gum up faster than coastal homes. A yearly graphite or dry-lube service, $25 per lock, keeps cylinders from seizing.
- Vacant and rental properties needing verification: We will not rekey a Banning house for whoever answers the door. We check ID and proof of residency before touching a lock, every single call.
Pricing for Residential Locksmith in Banning, CA
Here is what a Banning homeowner should expect to pay, written plainly. A standard rekey on a Kwikset or Schlage deadbolt runs $65 to $95 for the first lock, $20 to $35 for each additional lock keyed alike. A deadbolt installation runs $110 to $190 as covered above. A residential lockout, non-destructive entry, runs $85 to $135, with no after-hours surcharge and no add-on for the rekey if you decide you want one while we are there. High-security cylinders from Medeco or Mul-T-Lock add $95 to $220 per cylinder depending on the keyway. Every job gets a written price before work starts. Call (956) 275-7388 and we will walk through your exact lock and give you the number to the dollar.
We Also Serve Cities Near Banning
Ridley Locksmith & Security serves Banning and the surrounding communities, including Beaumont, Calimesa, San Jacinto, and Yucaipa. If you live just over the city line, the same written pricing, background-checked technicians, and 365-Day Done Right Promise apply. For more on our service area, see Residential Locksmith in Banning coverage details.
Serving Banning, CA - Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Residential Locksmith in Banning
Every Ridley technician arrives in a marked van, wearing a Ridley uniform with a photo ID badge, and carries a copy of The Garrison Code. You can also ask the technician to call our office from your driveway and confirm the job number. We do not use subcontractors, and the person at your door is the same background-checked employee we dispatched. Call (956) 275-7388 with any doubt.
Yes, that is standard practice for us. We ask for the brand stamped on the faceplate, whether it is a knob, lever, or deadbolt, and whether you want all locks keyed alike. Then we give you the written price before dispatch. That price is the invoice price. No trip charge transformation at the door, no surprise rekey add-on. Call (956) 275-7388 with the brand name and we will quote it exactly.
If the deadbolt still throws and retracts smoothly, a rekey is enough, and it runs $65 to $95. If the bolt sticks, the tailpiece is loose, or the key only works when you jiggle it, the cylinder is worn and a replacement makes more sense. We will tell you which one applies to your lock, and you get the written price for either path before we touch a screw.
We do not drill first. Most standard pin-and-tumbler Kwikset and Schlage cylinders open non-destructively in under ten minutes using picks or a shim. Drilling is a last resort for a broken cylinder or a locked deadbolt with a snapped key inside, and we tell you before we drill. A typical Banning lockout runs $85 to $135, all-inclusive, no after-hours fee.
Yes. We rekey the existing cylinders to a single key, then install a keypad deadbolt on the garage side door. The mechanical locks still work with one key, and the keypad gives you code access without a key. Total for that setup in Banning typically runs $180 to $320 depending on the keypad model. Call (956) 275-7388 for an exact written quote.
Written by Drew Kowalski, Owner at Ridley Locksmith & Security, serving Banning since 2007.