Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Rekey Locks Across Sheridan
Rekeying a lock in Sheridan means changing the internal pins so the old keys stop working and a new key operates the same hardware. A typical residential rekey runs $20 to $35 per cylinder, with most Sheridan homes needing three to six cylinders done in a single visit. Crews from Ridley Locksmith & Security reach most Sheridan addresses within 45 minutes, and the full price is quoted on the phone before anyone is dispatched. Call (956) 275-7388 and you’ll get a live person, not a voicemail.
Sheridan’s housing sits on both sides of a rural-urban line. That matters for lock work because the cylinder hardware changes from street to street. Some homes off Wheatland Road have builder-grade Kwikset knobs installed within the last decade. A quarter mile down, a 1960s farmhouse still carries original mortise lock bodies. It’s a mix you don’t see in a single-subdivision town, and it’s exactly why rekey work here rewards someone who shows up with a full mobile pinning kit rather than a bag of one-size-fits-all pins.
Why Ridley Locksmith & Security Is Sheridan’s Preferred Rekey Locks Company
Ridley Locksmith & Security has been part of the Garrison Partners family since 2007, and every job runs to what we call The Garrison Standard. That’s a written code covering how we quote, how we dispatch, and how we handle a repair that fails. Drew Kowalski runs the operation, and he’s the name attached to the guarantee. No anonymous call center. No subcontracted van showing up unannounced.
What Sheridan customers notice first is the written price. It’s delivered before any work starts, every time. It’s the same number on the invoice. If a rekey doesn’t hold up inside one full year, we come back at no charge under the 365-Day Done Right Promise. That’s not a verbal hedge. It’s a document you get with the job.
Technicians are background-checked and uniformed. They arrive in marked vehicles. They train on Schlage and Kwikset cylinders, and on high-security hardware from Medeco and Mul-T-Lock. For a town like Sheridan, where one property may have three different cylinder generations across the house and outbuildings, that range of training isn’t a luxury. It’s what keeps the visit to one trip.
Keyed Alike in Sheridan
Keyed alike is the work we do most often on Sheridan properties with a house, a detached garage, and sometimes a shop or barn. The job means rekeying multiple locks so one key operates all of them, instead of carrying a ring with five different keys. On rural parcels along the Sutter County line, we regularly key alike a front door, a side door, a garage deadbolt, and a shed padlock or cam lock in the same visit. Each cylinder is priced separately, typically $20 to $35 per lock, and the total is itemized before we start.
When Homeowners Choose It
New home closings are the biggest trigger. The seller hands over one key, but the buyer has no way of knowing how many copies floated around during showings, contractor visits, or previous tenants. Keying alike kills every old copy at once and leaves one new key for the whole property. It’s a clean start without replacing hardware.
What the Job Actually Involves
The technician removes each cylinder, swaps the internal pins to match a new key code, and reassembles everything. Lock housing stays in the door. Nothing gets drilled, and the finish on your Schlage or Kwikset hardware stays intact. Most homes here take under an hour, including outbuildings.
Rekey Deadbolt in Sheridan
Rekeying a deadbolt in Sheridan follows the same method as any cylinder rekey, but deadbolts get separate attention because they’re the lock that actually stops forced entry. Most of the deadbolts we see on Sheridan homes are Kwikset or Schlage single-cylinder models installed at build time. A deadbolt rekey runs $25 to $35 per cylinder, and we can key the deadbolt and the knob below it to the same key in the same visit.
Deadbolt and Knob on One Key
Homes built in the last 15 years around the tract subdivisions often have the deadbolt and entry knob on different keys, because the builder keyed them separately. Matching them to one key is a straightforward job, but it requires pinning both cylinders to the same code. The old keys stop working immediately.
When the Deadbolt Is Worn
Sheridan’s dry summers and dusty rural roads shorten pin life in exterior deadbolts, especially on homes near open agricultural fields. We can usually rekey a worn cylinder without replacing it, but where pins have rounded off, we’ll tell you honestly and show you the options before any work happens. You get the price for the rekey or the replacement before the first tool comes out.
Trusted Brands We Service in Sheridan
Most Sheridan homes carry Kwikset or Schlage hardware, and those are the cylinders we pin most often. We also work on Yale and Baldwin residential lines, and we’re certified for high-security systems from Medeco and Mul-T-Lock when a property calls for restricted keyways. Because our Rekey Locks technicians stock pin kits for all these brands on the van, there’s no second trip for parts and no mid-job price change. That local stocking matters in Sheridan, where the nearest big-box hardware run can eat 40 minutes one way.
Common Rekey Locks Problems We See in Sheridan Homes
- Mismatched cylinder generations on one property. A 2008 tract home may have original Kwikset knobs, a replaced Schlage deadbolt from 2019, and a no-name smart lock added last year. Each cylinder uses a different pin depth system, and a standard rekey needs the right kit for each. We carry all of them.
- Outbuilding locks full of old keys. Rural parcels here often have a barn, shop, or equipment shed that’s been through tenants, hired hands, or ranch managers. The house gets rekeyed but the outbuildings get skipped. That’s a security hole on the same property. We price every cylinder up front, including padlocks and cam locks.
- Mortise lock bodies in older homes. Some of Sheridan’s pre-1970 homes still have mortise locks rather than the modern bored cylinders. These take a slower rekey and different pins. A tech who only carries Kwikset and Schlage kits will either ruin the lock or reschedule. We don’t have that problem.
- Dust and grit in exterior cylinders. Sheridan sits on the edge of open farmland, and fine dust works into exterior lock cylinders every harvest season. The pins bind, keys stick, and the cylinder feels rough. A rekey that includes a proper cleanout restores the action, and it’s part of the same labor line, not an add-on.
Pricing for Rekey Locks in Sheridan, CA
A typical rekey in Sheridan runs $20 to $35 per cylinder. A standard home with a front doorknob, front deadbolt, garage entry knob, and back door deadbolt means four cylinders, so the job lands between $80 and $140 in labor. Padlocks, cam locks, and high-security cylinders like Medeco run slightly higher per cylinder and will be itemized on the written quote. We don’t charge a call-out fee on top of the labor, and we don’t add a surcharge when the tech pulls up. The number you get on the phone is the number on the invoice. Call (956) 275-7388 and we’ll walk through your exact cylinder count and give you the full price before anyone is dispatched.
We Also Serve Cities Near Sheridan
Our Sheridan crews regularly take rekey work in Lincoln, Penryn, Newcastle, and Auburn. If your property sits near the Placer County side or right along the county line, you’re still inside our normal service reach. The same written price and one-year guarantee apply to every job in the wider Rekey Locks in Sheridan service area.
Serving Sheridan, CA - Our Local Coverage Area
We’re based in the Sheridan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Rekey Locks in Sheridan
Rekeying replaces the internal pins and springs inside the cylinder so the old key no longer turns the plug. The lock body, handle, and deadbolt housing stay exactly where they are. It’s a hardware-level change, not a replacement, and every old key is dead the moment the new pins seat. Call (956) 275-7388 and we’ll tell you exactly how many cylinders need pinning and what the total will be before we dispatch.
No. A locksmith with the right pin kit and a key to the existing cylinder rekeys it non-destructively. Drilling only comes into play when the lock is frozen, the key is broken off inside with no working copy, or the cylinder is so worn it can’t be extracted by standard means. Even then, we’ll show you the situation and give you the price for a replacement cylinder before drilling anything. The phone quote has no surprises.
Yes, and it’s one of the most common jobs we do here. Both cylinders get pinned to the same key code, so a single key works the knob and the deadbolt at every door on the property. The job usually takes 10 to 15 minutes per door, and the per-cylinder price is the same whether we’re keying them alike or independently. Call (956) 275-7388 for a written quote before anyone heads out.
A standard four-cylinder home rekey inside Sheridan takes 30 to 45 minutes from the time the tech starts. Rural properties with detached garages, shops, or multiple outbuildings run longer, usually 60 to 90 minutes, depending on cylinder count. The travel time to your place is what it is, but the job itself doesn’t drag. The written price accounts for every cylinder at the address before we touch the first lock.
Sheridan’s mix of newer tract homes and older rural properties means Kwikset, Schlage, and occasionally off-brand or mortise hardware on the same street. Different brands use different pin depths, so a rekey requires matching the right pin kit to each cylinder. It doesn’t change the per-cylinder price much, but it does change what a tech needs to bring. We stock all of it on the van, which is why our price holds from phone to invoice. Call (956) 275-7388 for an exact number on your specific locks.
Written by Drew Kowalski, Owner at Ridley Locksmith & Security, serving Sheridan since the Garrison Partners founding in 2007.







Before
After