Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Before
AfterFast, Reliable Rekey Locks Across Campbell
Rekeying a lock in Campbell typically costs between $95 and $160 for a standard pin-and-tumbler cylinder, and a technician can usually finish the job in 30 to 45 minutes once on site. That means changing the internal pins so your old keys stop working, without replacing the door hardware itself. We dispatch background-checked, uniformed technicians to every Campbell neighborhood, from the downtown core off East Campbell Avenue to the residential streets near Pruneyard and the homes tucked back toward San Tomas Expressway. Call (956) 275-7388 and a live person answers, day or night. You’ll get a written price before anyone is dispatched, and that’s the price on the invoice.
Why Ridley Locksmith & Security Is Campbell’s Preferred Rekey Locks Company
Campbell homeowners don’t need another locksmith who quotes one number on the phone and names a higher one at the door. They need a company with a written standard and a name behind it. Ridley Locksmith & Security has operated under The Garrison Standard since 2007, and every technician we send into Campbell carries that standard with them: written price first, written guarantee on the work, no subcontractors in unmarked vans.
Our local reputation in Campbell is built on showing up when we say we will and doing exactly what we quoted. The neighborhoods along Winchester Boulevard, the condos near Campbell Community Center, and the older single-family homes off Bascom Avenue all get the same treatment: a uniformed tech who introduces himself, walks the job with you, and hands you a written price before touching a screwdriver. No surprises after the fact.
Response time to Campbell averages 30 to 45 minutes for residential calls. A live person answers the phone 24/7. That matters when you’ve just moved into a house off Harriet Avenue and you don’t know who else has a key to the front door.
Keyed Alike in Campbell
Keyed alike is what we call rekeying multiple locks so they all work from a single key, and in Campbell it’s one of the most common requests we get from new homeowners and landlords alike. The job means repinning each cylinder to the same depths, so one key turns the front deadbolt, the back door, the garage entry, and the side gate. No new hardware, no new holes, just fresh pins and cut keys. A keyed-alike job across three or four locks in Campbell usually runs $25 to $30 per cylinder plus a trip charge, so the total lands around $75 to $120 depending on how many cylinders we touch.
When New Homeowners Call
Closing on a house in Campbell is the moment to rekey. You don’t know who the previous owner handed keys to: a neighbor, a dog walker, a contractor who worked on the place before the sale. Rekeying every exterior door to one key closes that gap on day one. We do this for buyers all over Campbell, from the 1950s ranchers near downtown to the townhomes off Hamilton Avenue.
Matching Mixed Hardware
One key doesn’t do much good if your locks don’t share a keyway. Older Schlage cylinders, Kwikset knobs, and even some Baldwin deadbolts can usually be pinned alike as long as they’re standard 5-pin keyways. Our techs carry pin kits for all of them, so the single key you get at the end actually turns every lock on the property.
Rekey Deadbolt in Campbell
Rekey deadbolt in Campbell means replacing the pins inside an existing deadbolt so the old key stops working and a new key operates the lock. It’s the single highest-impact step a Campbell homeowner can take after a tenant change, a breakup, or a lost key. The deadbolt stays in the door, the strike plate stays in the jamb, and the whole job usually takes under 20 minutes on a standard Schlage or Kwikset deadbolt. Expect to pay $25 to $35 per deadbolt for the rekey, on top of the service call fee.
Deadbolts Without Drilling
A proper rekey does not require drilling. The cylinder comes out with the door open and the mounting screws visible. If your Campbell deadbolt is working, there’s nothing to force off, no chips in the door, no scrap metal left behind. Our default is non-destructive. The only time a deadbolt gets drilled in Campbell is when a key is broken off inside the cylinder or the lock has seized past the point of turning, and even then we show you the failure before the drill comes out.
After the Rekey
Each rekeyed deadbolt gets a quick function check: key turns free, thumbturn works, bolt throws and retracts without scraping. We also check that the new key isn’t a copy that will fail after a few months. You get new keys cut on proper blanks, not cheap aftermarket metal.
Trusted Brands We Service in Campbell
We rekey Schlage and Kwikset hardware every day in Campbell; those two names cover the majority of what’s on doors in this city. We also carry pin kits for high-security lines including Medeco, Abloy, Mul-T-Lock, and Sargent, which matters when a previous owner installed a smart lock with a proprietary keyway. Because our techs stock common residential pins and blanks on the van, most Campbell rekeys happen in a single visit without a second trip for parts. If you have a Baldwin deadbolt, an Emtek handleset, or a high-security Medeco cylinder, we can usually pin it on the spot.
Common Rekey Locks Problems We See in Campbell Homes
- Mixed 1950s and smart-lock hardware on the same house. Campbell’s older homes often keep an original mortise or pin-and-tumbler lock on one door while a newer smart lock sits on another. A rekey might mean matching old brass to a modern keyway, and that only works when the tech carries a broad pin set.
- Downtown Campbell phone-quote bait-and-switch. Too many Campbell homeowners accept a low quote over the phone, then hear the on-site price jump because the tech claims an old mortise lock needs drilling. We quote the rekey flat before dispatch and the default is always non-destructive.
- Seized 1960s cylinders along the Campbell Avenue corridor. Hard water, old lubricant, and decades of use gum up aging lock cylinders. A rekey attempt without the right pin kit and lubricant turns into a full cylinder replacement nobody agreed to. Our techs diagnose the lock before touching it.
- Master key systems with broken key control. Commercial landlords in Campbell sometimes discover their master key system has been duplicated at a hardware store. Changing one cylinder doesn’t fix it; the master pins need recombinating too. We explain what that means before we charge for it.
Pricing for Rekey Locks in Campbell, CA
We Also Serve Cities Near Campbell
Our Rekey Locks team works across the West Valley, not just Campbell. We regularly run rekey jobs in Campbell, Saratoga, Los Gatos, Santa Clara, and Cupertino, with the same written-price and written-guarantee policies on every call. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, and crews serve Campbell locally. Whether you’re a homeowner or a business operator, the standard doesn’t change at the city line.
Serving Campbell, CA - Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Rekey Locks in Campbell
How do I know you won’t charge more than the quote once you’re at my Campbell door?
You get a written price before any work starts, and that price stands unless you add work to the job. We don’t surprise you with a drill charge because we don’t drill working locks. If you approve additional work mid-job, you approve a new written price for that work before we continue. Call (956) 275-7388 for a quote; the number you hear is the number you’ll see on the invoice.
My Campbell house has one original Schlage deadbolt and a newer Kwikset knob lock – can you make them all take the same key?
Yes, in almost every case. Our techs carry Schlage and Kwikset pin kits on the van, and standard 5-pin cylinders from both brands can be pinned alike on the same visit. The repin takes a few minutes per lock, and you leave with one key that works every exterior door. If a hardware mismatch comes up, we tell you before we do the work and price the fix in writing.
Do you have to drill my lock to rekey it in Campbell?
No. A rekey is a non-destructive job on a working lock: we pull the cylinder, swap the pins, put it back. Drilling only enters the conversation when a key is snapped off in the cylinder, the lock has seized solid, or you’ve lost every key. Even then, we show you the failed part and get your go-ahead first.
What brands of locks do you carry pins for when you rekey in Campbell?
We stock pins and blanks for Schlage, Kwikset, and the common residential lines you find across Campbell’s housing stock, plus high-security kits for Medeco, Mul-T-Lock, Abloy, and Sargent. If your smart lock or high-security cylinder uses a proprietary keyway, we can usually rekey it on the spot without a second trip.
How long does a standard rekey take at a Campbell home?
For a single standard cylinder, expect 20 to 30 minutes on site. A keyed-alike job across three or four doors takes 45 minutes to an hour. High-security cylinders take a little longer because the pins are finer and the key cuts are tighter. The tech gives you a time range when you book, and it holds unless the lock has an internal problem we couldn’t see from the phone call.
Contact Ridley Locksmith & Security in Campbell
If you need a rekey in Campbell, call (956) 275-7388. A live person answers 24/7, you’ll get a written price before anyone is dispatched, and the work carries the written 365-Day Done Right Promise. Campbell’s older locks don’t need drilled-out replacements and the price doesn’t need to move after the van parks. Get the quote, get the key, and know exactly who’s coming through the door.
Written by Drew Kowalski, Owner at Ridley Locksmith & Security, serving Campbell, CA. Part of the Garrison Partners family, operating to The Garrison Standard since 2007.